Resource: proxmox_virtual_environment_cluster_firewall_security_group¶

A security group is a collection of rules, defined at cluster level, which can be used in all VMs' rules. For example, you can define a group named “webserver” with rules to open the http and https ports.

Example Usage¶

resource "proxmox_virtual_environment_cluster_firewall_security_group" "webserver" {
  name    = "webserver"
  comment = "Managed by Terraform"

  rule {
    type    = "in"
    action  = "ACCEPT"
    comment = "Allow HTTP"
    dest    = "192.168.1.5"
    dport   = "80"
    proto   = "tcp"
    log     = "info"
  }

  rule {
    type    = "in"
    action  = "ACCEPT"
    comment = "Allow HTTPS"
    dest    = "192.168.1.5"
    dport   = "443"
    proto   = "tcp"
    log     = "info"
  }
}

Argument Reference¶

• name - (Required) Security group name.
• comment - (Optional) Security group comment.
• rule - (Optional) Firewall rule block (multiple blocks supported).
  • action - (Required) Rule action (ACCEPT, DROP, REJECT).
  • type - (Required) Rule type (in, out, forward).
  • comment - (Optional) Rule comment.
  • dest - (Optional) Restrict packet destination address. This can refer to a single IP address, an IP set ('+ipsetname') or an IP alias definition. You can also specify an address range like 20.34.101.207-201.3.9.99, or a list of IP addresses and networks (entries are separated by comma). Please do not mix IPv4 and IPv6 addresses inside such lists.
  • dport - (Optional) Restrict TCP/UDP destination port. You can use service names or simple numbers (0-65535), as defined in '/etc/ services'. Port ranges can be specified with '\d+:\d+', for example 80:85, and you can use comma separated list to match several ports or ranges.
  • enabled - (Optional) Enable this rule. Defaults to true.
  • iface - (Optional) Network interface name. You have to use network configuration key names for VMs and containers ('net\d+'). Host related rules can use arbitrary strings.
  • log - (Optional) Log level for this rule (emerg, alert, crit, err, warning, notice, info, debug, nolog).
  • macro- (Optional) Macro name. Use predefined standard macro from https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_firewall_macro_definitions
  • proto - (Optional) Restrict packet protocol. You can use protocol names as defined in '/etc/protocols'.
  • source - (Optional) Restrict packet source address. This can refer to a single IP address, an IP set ('+ipsetname') or an IP alias definition. You can also specify an address range like 20.34.101.207-201.3.9.99, or a list of IP addresses and networks ( entries are separated by comma). Please do not mix IPv4 and IPv6 addresses inside such lists.
  • sport - (Optional) Restrict TCP/UDP source port. You can use service names or simple numbers (0-65535), as defined in '/etc/ services'. Port ranges can be specified with '\d+:\d+', for example 80:85, and you can use comma separated list to match several ports or ranges.

Attribute Reference¶

• rule
  • pos - Position of the rule in the list.

There are no attribute references available for this resource.

Import¶

Instances can be imported using the name, e.g.,

terraform import proxmox_virtual_environment_cluster_firewall_security_group.webserver webserver